The new Q36.5 Termico Overshoes are a revision of the original and utilise the company's extensive development of proprietary materials. Employing two key fabrics, Thermal Shell and Hybrid Shell to offer the optimal balance of waterproofing and moisture transfer in a lightweight, protective overshoe.
Unlike the new deep winter Super Termico overshoes that pull-on over the shoe much like a sock, the Termico is of a more traditional construction using a zip closure at the back and with a central, offset seam on the top of the shoe cover. For this reason, the Termico is more lightly protective with a stable operating range of 4oC to 12oC, where body temperature is guaranteed.
Much of the trick of overshoes is being able to manage moisture. Not just from the elements but indeed that generated by the rider. If your overshoe is exemplary at keeping water out then it is likely that your will get wet from the inside, making your feet uncomfortable and often, when wind is involved, cold. Conversely, if your overshoes are adroit at moving moisture from your feet to the outside then it is likely that they will not be so adept at keeping the rain off.
Enter Q36.5's Termico Shoe Covers. Constructed from the company's Thermal Shell (like the Termico Toe Covers) and Hybrid Shell (Hybrid Que Jacket / Leg Warmers), Q36.5 have created the ultimate balance of weather protection and moisture transfer for early winter riding.
UF Thermal Shell features on the front panel of the overshoe, where maximum protection from the elements is required, Q36.5’s laminated windproof and water-resistant fabric. Thermal Shell features heavy use of Polyamide and the external layer of the shell constructed from an extremely dense and lightweight polyamide-lycra blend with a water-resistance treatment. The fabric is highly elastic, with 4-way stretch for best ease of movement and built for durability and toughness. The inner layer is made from the finest Italian polyester fleece for insulation with excellent moisture transportation properties. The key to the fabric though, is the middle layer. A Japanese-made hydrophilic 18 micron non-porous PU membrane. Q36.5 favours the use of hydrophilic (water-loving) over hydrophobic membranes (such as Goretex™), as they best allow for the body to transpire and remain dry whilst maintaining an optimal body temperature during intense athletic activity.
The top and rear panels of the Termico Overshoes employ the UF Hybrid Shell, an extremely fast drying, water and wind resistant fabric. UF HybridShell is a non-laminated, double-woven fabric that is able to mimic qualities of a shell (laminated fabric with membrane) without many of the associated drawbacks, as well as performing the thermal functions of a fleece material. The fabric is woven at right angles at such a high density that the finished fabric has technical values within range of materials that use membranes. For example it is twice as breathable as “Windstop” shell fabrics and over 20 times more wind resistant than typical fleece fabrics.
The new Termico Overshoes are finished with an obliquely positioned zip for minimal invasiveness, reduced pressure on the wearer's calf and in order to reduce the torsional load on the zip, ensuring secure fit and durability. The zip is reflective too, adding enhanced visibility on low-light or foggy days and at night.
Weighing just 90g, the Termico Overshoes are light and unobtrusive while providing essential protection from the elements.
As a huge fan of Q36.5, there isn't much - if anything in the range I haven't either worn or own!
As with all cycling apparel, in order to do its job effectively : keep you warm or cool, dry, comfortable and aero, it has to fit correctly. All too often we see riders in clothing that is far too big, flapping around or with gaping sleeves.
We get it, some people don't want to 'look silly' in tight fitting lycra - the stigma for many remains. To these folk I say consider this: most of those who'll be paying you any mind while you ride around will be other cyclists; they will almost certainly think you look silly if you're riding around in loose, ill-fitting kit! Besides, you want to get the best from your investment so who cares what people who aren't part of the cycling fraternity think - if it fits properly, it works the way it's designed to.
Q36.5 is highly technical kit; regionally sweat-mapped for optimum moisture management; ergogenic pattern cuts for best possible form-fitting and aerodynamics; not to mention the thermal conductivity that helps stabilise your body temperature, freeing up energy for riding. Fit is key and often at odds with your civvies.
We recommend purchasing and wearing your Q36.5 garment or shoes ‘true to size’ - if you are usually a Medium, purchase a Medium; 43.5 shoe then 43.5. However, when trying on a Q36.5 garment for the first time please keep in mind that cut and fit is designed for on the bike comfort and performance, indeed it is a pre-shaped cut meaning and the user may feel a minor degree of strain (eg. in the shoulder and chest area of the jersey / jacket or the bib short braces) when standing upright - this is totally normal and preferred, since you don't ride standing upright!
Try adopting a tucked, cycling position when trying kit on - all cycling clothing of any note is pre-shaped or cut in this position in order to deliver the technical benefits of the piece. When on the bicycle, any feeling of restriction should literally disappear and be replaced by a snug fit yet with excellent ease of movement, comfort and stability. With shoes, you want a small gap between your toes and the end of the shoe. As you ride, your feet swell and your arches collapse slightly causing your feet to 'creep'. Most of this movement is lateral but there is some longitudinal movement also. If your toes are at the end of the shoe to begin with - you will suffer with numbness and pain.
If you are ever unsure of sizing - maybe you have no frame of reference or you've tried 2 sizes and both seem to fit - the recommendation is to size down! Better to have your cycling kit tight than loose. Materials will give out slightly too and in the case of bibshorts, you want the pad firmly against you so you are stable in the saddle and so there is no rubbing of material or shifting of the pad - this only leads to bad places; saddle sores and ultimately, quicker wear in your kit.
If you are between sizes or already borderline on a size (close to it being too small), you may wish to size up one. Similarly, if you are not quite 'racing snake' and the size chart suggests you are a particular size - if you are close to the upper most extreme of that measure - you may wish to size up (it's how it works for me!).
Overall, the jerseys seem to be smaller / tighter than in previous seasons so this may also factor if you are used to the brand. Ultimately if you really don't like tight fitting cycle kit, then focus on the Gregarius range and consider a size up . Use the charts as a guide.
For the latest seasons (2024 ->) there have been some changes to short leg length. In much the same way that the Pinstripe Pro (now Dottore Pro) jersey had an additional 2cm added for better overall fit, the Dottore and Unique bib shorts now have legs that are 2.5cm longer to better support the full length of the muscle. I would expect to see this creep into all shorts moving forward. Remember - there are rolling changes made where necessary during the 4 year development cycle of Q36.5 clothing.
There are also some changes to the structure of the range - at least in name. Collections are split by tech and fit: Democtratic Fit / GREGARIUS (Essentially KNITTED Fabrics with a more forgiving fit), Ergogenic Fit / DOTTORE (WOVEN Fabrics that fit close and are semi-compressive) and Skin Fit / UNIQUE (A small grouping, of UNIQUE Pro products that are second-skin). We separate them out in the menus on the site if it helps!
A note on socks : Q36.5 socks are supremely comfortable, easily the best I have ever owned. They last too and that feeling continues wash after wash where others become crisp and scratchy. If you are between sizes or unsure then I suggest you size down. There is plenty of stretch in Q36.5. With some models - notably the Be Love 0 and Be Love Seta - it is recommended that you cold-wash them before first use; they will shrink ever so slightly but not enough to warrant buying a size up.
Base layers are critical to the performance of anything you layer over the top. They should absolutely be a second skin or they don't do their job. If it fits like your favourite Sunday afternoon baggy T-shirt, bin it! Always buy the size that fits closest without any pinching under the arms or restriction at the cuff. Again, size down if you are unsure or between prescribed sizes. You may find that for the UK climate you can survive the winter in a short sleeve Q36.5 Base (Base Layer 2) - though this will depend on how you feel the cold. During summer, a base layer is still beneficial, helping to move moisture off the skin - where the temperature exceeds 24oC, you may find that a Clima or Dottore PRO jersey are fine next to the skin but both (and all other jerseys) will perform better when the Zero Mesh base layer is in play.
Get a Vest / Gilet! If you don't own one, this is the single piece of equipment that offers the broadest range of benefits. A good gilet offers wind protection on chilly mornings, late evenings, descents after hot and sweaty climbs and core protection in sudden downpours - it is virtually indispensible year round. Not sure where the weather will go an any given ride? Stuff it in a jersey pocket and your core will always be protected, extending the operating temperature of the rest of your outfit; be that in summer or winter.
Q36.5 make numerous vests - one uniquely for potentially wet rides but that also serves to keep the wind off (Rain Shell Vest); the all-round Vest L1 Essential / Hybrid Vest that offers both thermal stability, insulation and weather protection; the Air Vest, the ultimate in low bulk emergency wear that will keep the wind and showers from ruining your ride and that packs down incredibly small - it weighs just 69g; and the Adventure Insulation Vest developed for lower intensity and more adventurous forays off the beaten track in a design that weighs in at just 115g & packs away easily.Remember - the fit needs to be close, particularly when layering.
Be smart with your Q36.5 clothing. Wash it without softener at cold temps - preferably as soon as you get in from your ride. And use their Tech Wash - it will make your kit last longer and perform the way it is supposed to.